PowerVar Ametek Security II UPM ABCE802-11 Product Comparison

Specification: PowerVar Ametek Model: Battery Backup Power Model:
Model: PowerVar Ametek Security II UPM ABCE802-11 BBP-1500A-PSW-LI
Power Rating (VA/Watts): 800 / 720 1500 / 900
Type: Line Interactive Line Interactive
Inverter Waveform:  Low Distortion Sine Wave Pure Sine Wave
Transfer Time:  4 ms 2-4 ms
Frequency  60 Hz 50 or 60Hz +/-5% (Auto Sensing)
Input Voltage: 120 120
Output Voltage: 120 120
Input Voltage Range: 96 To 144 Volts 90 To 150 Volts
Output Regulation (On Mains): ± 10% ± 5%
Output Regulation (On Battery): ± 5% ± 5%, ± 10% After Low Battery Alarm
Backup Time at Full Load: 5 Minutes 6 Minutes
Recharge Time: 6 Hours To 80% 4 Hours To 90%
Batteries: 2x 12 Volt 7 Amp Hours 3x 12 Volt 7.2 Amp Hours
Input Plug: NEMA 5-15P (Plug) NEMA 5-15P (Plug)
Output Receptacles: 6x NEMA 5-15R (Receptacle) 6x NEMA 5-15R (Receptacle)
Temperature (Operating): 0 to 40℃ (32 to 104℉) 0 to 40℃ (32 to 104℉)
Humidity (Operating): 5% to 90% Non-Condensing 0% to 95% Non-Condensing
Altitude: (Maximum Operating): 3,000m (10,000 ft) 3,500m (11,482 ft)
This page and its corresponding pages are intended to assist in evaluating products from varying manufacturers. The system specifications from outside manufactures are taken from spec sheets, user guides, and other material provided on the internet and may not be entirely accurate. Please verify the information provided before making a purchase decision.
PowerVar Ametek Security II UPM Series
PowerVar Ametek Security II UPM ABCE422-11
PowerVar Ametek Security II UPM ABCE602-11
PowerVar Ametek Security II UPM ABCE802-11
PowerVar Ametek Security II UPM ABCE1102-11
PowerVar Ametek Security II UPM ABCE1442-11
PowerVar Ametek Security II UPM ABCE2202-11
PowerVar Ametek Security II UPM ABCE3002-11