Battery Backup UPS For Thermo Orbitrap Eclipse Tribrid LCMS

Battery Backup Power, Inc. provides power conditioning and voltage regulating uninterruptible power supplies for all types of laboratory instruments. Pictured below is a Battery Backup Power, Inc. Plug And Play 10 kVA / 10,000 Watt Power Conditioner, Voltage Regulator, & Battery Backup UPS With Built In Isolation Transformer protecting a Thermo Fisher Scientific Orbitrap Eclipse Tribrid Mass Spectrometer with LC stack and computer/monitor. 

Battery Backup Power 10KVA UPS Protecting Thermo Fisher Scientific Orbitrap Eclipse Tribrid Mass Spectrometer LCMS GCMS

The Battery Backup Power, Inc. 10KVA plug and play system is designed to be compatible with almost every make and model LCMS, GCMS, HPLC, ICP-MS, ICP-OES, PCR, and many, many more instrument types. Below is a photo of the 230 volt output receptacles (outlined in red) that are used with the Thermo Fisher Scientific Orbitrap Eclipse Tribrid Mass Spectrometer. The bottom (8) receptacles are 120 volt and are used with the LC stack, computer, and monitor. 

Output Receptacles For Thermo Fisher Scientific Orbitrap Eclipse Tribrid Mass Spectrometer

The system is designed to be plugged into a building outlet similar to an electric dryer receptacle called a NEMA 6-50P (plug, 200-240 volts, 50 amps). It's internal transformer will regulate the output voltage to a steady dual 115 volts and 230 volts (depending on the receptacle type). This format reduces instrument setup time, facility electrical costs, and can typically be installed and turned on by a lab technician with no tools within 5 minutes. 

UPS Battery Backup Power For Lab Instruments GCMS LCMS ICP PCR

For more information on acquiring this instrument backup power and protection system for your lab, please visit: You may also contact (855) 330-7799 or email

Leave a comment

Please note, comments must be approved before they are published