10 kVA / 10 kW 3 Phase Battery Backup Uninterruptible Power Supply (UPS) And Power Conditioner

10 kVA / 10 kW 3 Phase Power Conditioner, Voltage Regulator, & Battery Backup UPS

Regular price: $ 12,999.99
Sale price: $ 12,999.99
Regular price
Unit price: per

Voltage

Extended Backup Time Options

Quantity

Quantity must be 1 or more

UPS User Guide:

BBP-AR-33 10K-40K 3 Phase UPS User And Installation Guide

Integrated Network Card User Guide:
SNMP/Network Card User Guide For BBP-AR-33 10KVA-40KVA 3 Phase UPS

Optional External Battery Cabinet User/Installation Guide:
BBP-AR-33 10KVA, 15KVA, & 20KVA Optional External Battery Cabinet User And Installation Guide

Spec Sheet/Cut Sheet:
BBP-AR-33 10K-40K 3 Phase UPS Model Specifications

4 Tier Power Protection System – Surge Protection, Real Time Power Conditioning With Voltage Regulation, Pure Sine Wave Output, & Always On Double Conversion Backup Power Technology (Phase Locked To Utility Power Allowing Seamless Transition To Backup Power).

Do you need a PDF quote or a custom emergency backup solution? Email us at engineering@batterybackuppower.com.

Multiple Backup Time Options:

Model Number:	Description (Under Battery Options Drop Down):	Approximate Backup Time At Full Load:
BBP-AR-33-10K	UPS With Internal Batteries Only (20 Batteries, 12 Volts, 9 Amp Hours Each) 2.16 KWH	6 Minutes
BBP-AR-33-10K-WEBP	UPS Plus 1 Extra External Battery Pack (100 Batteries, 12 Volts, 9 Amp Hours Each) 10.80 KWH	32 Minutes
BBP-AR-33-10K-W2EBP	UPS Plus 2 Extra External Battery Packs (180 Batteries, 12 Volts, 9 Amp Hours Each) 19.44 KWH	57 Minutes
BBP-AR-33-10K-W3EBP	UPS Plus 3 Extra External Battery Packs (260 Batteries, 12 Volts, 9 Amp Hours Each) 28.08 KWH	1 Hour 22 Minutes
BBP-AR-33-10K-W4EBP	UPS Plus 4 Extra External Battery Packs (340 Batteries, 12 Volts, 9 Amp Hours Each) 36.72 KWH	1 Hour 48 Minutes
BBP-AR-33-10K-W5EBP	UPS Plus 5 Extra External Battery Packs (420 Batteries, 12 Volts, 9 Amp Hours Each) 45.36 KWH	2 Hours 13 Minutes

Model: BBP-AR-33-10K
10000 VA (10 kVA) / 10000 Watt (10 kW)
3 Phase
Tower
Pure Sine Wave Clean Output To Operate And Maximize The Life Of Even The Most Sensitive Electronics
Online (Double Conversion) - Highest Level Of Protection Available - Battery Power Always Engaged, No Switching Delay
Accepts Generator Power (Direct or On Automatic Transfer Switch)
Constant Voltage Regulation
Constant Frequency Regulation
Factory Warranty: 3 Years On Electronics And 1 Year Warranty On Batteries
Optional Extended Warranty: 6 Years On Electronics And 3 Year Warranty On Batteries
Heavy Duty Industrial Grade For Constant Use
For Use With Laboratory Instruments
For Use With Medical Devices
For Use With Hospital Equipment
For Use With Sensitive IT Equipment
1.0 Power Factor (Unity Power Factor)
UL Listed
Management And Monitoring Software Included
Battery Configuration:

Built In 20x 12 Volt 9 Amp Hour Batteries

6 Minutes (Full Load)
12 Minutes (Half Load)

Add 1 Or More External Battery Cabinets To Extend Backup Time

Input:

138~270 VAC 3 Phase @ 50% Load
173~253 VAC 3 Phase @ 100% Load

Output:

208/220 VAC 3 Phase

Full Load Estimated Run Time On Battery Power:

6 Minutes With Internal Batteries
Contact Us For Additional Battery Cabinet Configurations

Operating Temperature Rating: 0C ~ +40C
Humidity: <95% And Non-Condensing
Dimensions D X W X H (mm): 628 X 250 X 827
Net Weight: 95 Kgs. (210 lbs.)

Seamless Backup Power For Critical Loads (Works Great As Bridge Power For Generators)

I use these for commercial customers that install generators. Feed this UPS with a 30 amp 3 pole breaker from the main panel and then have the output feed a smaller 120/208Y 3 phase critical load sub panel (27 amps max). Everything on that critical load sub panel will stay online during power outages, brown outs, and when the generator starts up (triggered by your ATS). Typically the critical loads would circuits that feed server racks, computers, phones, etc. No motor loads unless you confirm the LRA or inrush is below 27 amps 120/208Y.

Easy to install 120/208Y 3 phase UPS

This was the easiest to install 3 phase UPS I've ever worked with. It is 5 wires in, 5 wires out, flip on 3 breakers, push the power button, and you are done. You need to wire the 3 hot wires in the correct phase rotation. If you do it wrong, the LCD will tell you so you just power down, switch 2 wires, and you are good. It also has bypass input already wired and ready to go with the included jumper wires.

Back to Online (Double Conversion) Pure Sine Wave Battery Backup Uninterruptible Power Supply Systems (UPS) And Power Conditioners

10 kVA / 10 kW 3 Phase Power Conditioner, Voltage Regulator, & Battery Backup UPS

Customer Reviews