Battery Backup UPS (Uninterruptible Power Supply) And Power Conditioner For Clover Station

$ 599.99

4 Tier Power Protection System – Surge Protection, Real Time Power Conditioning With Voltage Regulation, Pure Sine Wave Output, & Always On Double Conversion Backup Power Technology (Phase Locked To Utility Power Allowing Seamless Transition To Backup Power).


Outlets To Protect The Following Equipment:

  • Clover Station
  • High Speed Thermal Printer Station
  • Cash Drawer
  • Chip And PIN Card Reader

Multiple Backup Time Options:

Model Number: Description (Under Battery Options Drop Down): Clover Station Approximate Backup Time:
BBP-AR-1000-PSW-ONL UPS With Internal Batteries Only 41 Minutes
BBP-AR-1000-PSW-ONL-WEBP UPS Plus 1 Extra External Battery Pack 3 Hours 25 Minutes
BBP-AR-1000-PSW-ONL-W2EBP UPS Plus 2 Extra External Battery Packs 6 Hours 10 Minutes

 

  • 1000 VA (1 kVA) / 900 Watt (0.9 kW)
  • 55-150 Volt AC Input / 100/110/115/120/127 Volt AC Output
  • Energy Efficient/High Efficiency UPS Mode >96.5% Efficiency When Enabled
  • LCD Status Measurements Include Voltage, Frequency, Load Level, Battery Level, Output Current, and Estimated Remaining Backup Time
  • Tower
  • Pure Sine Wave Clean Output To Operate And Maximize The Life Of Even The Most Sensitive Electronics
  • Online (Double Conversion) - Highest Level Of Protection Available - Battery Power Always Engaged, No Switching Delay (Phase Locked To Input Power Source)
  • Wide Frequency Input Range (44-66 Hz Auto Sensing) Allows For Generator Power To Be Used As A Primary Or Secondary Input Power Source (Using Automatic Transfer Switch Before UPS)
  • Constant Voltage Regulation (±1%)
  • Constant Frequency Regulation (±1 or ±3% Selectable)
  • Factory Warranty: 3 Years On Electronics And 1 Year Warranty On Batteries
  • Optional Extended Warranty: 5 Years On Electronics And 1 Year Warranty On Batteries
  • Digital Signal Processing (DSP) Allows For Greater Reliability Over Older UPS Designs And Superior Electric Noise Filtration
  • >0.99 Input Power Factor / 0.92 Output Power Factor (Line Mode) / 0.965 Output Power Factor (High Efficiency Mode) For Superior Efficiency And Power Savings
  • INPUT: 120 Volt, 15 Amp NEMA 5-15P (Standard Wall Plug)
  • OUTPUT: 6x 120 Volt, NEMA 5-15R Battery & Surge Protected Receptacles (Standard Wall Receptacles) 
    • Weight: 27.1 lbs.
    • Dimensions (Inches): 6.1 X 10.2 X 15.9 (W x H x D)
    • Operating Temperature: 32°-104° F
    • Operating Humidity: 20%~95%, Non-Condensing
    • Operating Elevation: 3,280 Feet Without De-Rating 
    • Cold Start Capable (Shipped With Cold Start Disabled, Will Enable Automatically After Receiving Power For The First Time After Shipping)
    • cTUVus, cULus, and FCC Certified
    • Includes Software For Windows Monitoring & Configuration 
    • Free Shipping/Freight Within The United States Or To U.S. Based Freight Forwarder Specified Location (List U.S. Based Location Specified By Forwarder In Shipping Address For International Orders)

    User Guides:
    
    -Battery Backup Power Tower UPS User Guide.pdf
    -Battery Backup Power Tower External Battery Pack User Guide.pdf

    Spec Sheet/Cut Sheet:
    -BBP Tower DSP Series Specification Sheet.pdf

    Replacement Batteries:
    -Leoch DJW12-9.0 (Lead Acid), Yuasa 7.5-12 (Lead Acid), Yuasa REW45-12 (Lead Acid), Or Battery Backup Power BBP-LIFEPO4-HDR-12V-7.2AH (Lithium Iron Phosphate)