2 kVA / 1,800 Watt Digital Convertible Rack Mount/Tower Battery Backup UPS And Power Conditioner For Sensitive Electronics

$ 1,399.99

The 2,000 VA (2 kVA) / 1,800 Watt (1.8 kW) rack mount online pure sine wave battery backup UPS (uninterruptible power supply) and power conditioner with surge protection automatically provides defense against power problems. Give your electronics longer life while protecting them from harmful dirty power problems that may otherwise damage or degrade their performance. Much more than a battery in a box, every Battery Backup Power, Inc. system doubles as a power conditioner, actively correcting voltage issues left unresolved by the power company or created by other power hungry electronics in your home or office (laser printers, HVAC systems, refrigeration equipment, etc.). Extend your battery powered run time by adding easy quick connect external battery packs. Cold start functionality allows startup and operation on stored battery power even with no external grid power.

4 Tier Power Protection System – Surge Protection, Real Time Power Conditioning With Voltage Regulation, Pure Sine Wave Output, & Always On Double Conversion Backup Power Technology (Phase Locked To Utility Power Allowing Seamless Transition To Backup Power).

Convertible design allows this system to be deployed in a tower or rack mount configuration.  

Do you need a PDF quote or a custom emergency backup solution? Email us at engineering@batterybackuppower.com


Multiple Backup Time Options:

Model Number: Description (Under Battery Options Drop Down): Approximate Backup Time At Full Load:
BBP-AR-2000RM-PSW-ONL UPS With Internal Batteries Only 11 Minutes
BBP-AR-2000RM-PSW-ONL-WEBP UPS Plus 1 Extra External Battery Pack 35 Minutes
BBP-AR-2000RM-PSW-ONL-W2EBP UPS Plus 2 Extra External Battery Packs 58 Minutes

 

  • 2000 VA (2 kVA) / 1,800 Watt (1.8 kW)
  • 55-150 Volt AC Input / 100/110/115/120/127 Volt AC Output
  • Energy Efficient/High Efficiency UPS Mode >96.5% Efficiency When Enabled
  • LCD Status Measurements Include Voltage, Frequency, Load Level, Battery Level, Output Current, and Estimated Remaining Backup Time
  • Rack Mount (2U)
  • Pure Sine Wave Clean Output To Operate And Maximize The Life Of Even The Most Sensitive Electronics
  • Online (Double Conversion) - Highest Level Of Protection Available - Battery Power Always Engaged, No Switching Delay (Phase Locked To Input Power Source)
  • Wide Frequency Input Range (44-66 Hz Auto Sensing) Allows For Generator Power To Be Used As A Primary Or Secondary Input Power Source (Using Automatic Transfer Switch Before UPS)
  • Constant Voltage Regulation (±2%)
  • Constant Frequency Regulation (±1 or ±3% Selectable)
  • Factory Warranty: 3 Years On Electronics And 1 Year Warranty On Batteries
  • Optional Extended Warranty: 5 Years On Electronics And 1 Year Warranty On Batteries
  • Digital Signal Processing (DSP) Allows For Greater Reliability Over Older UPS Designs And Superior Electric Noise Filtration
  • >0.99 Input Power Factor / 0.9 Output Power Factor (Line Mode) / 0.965 Output Power Factor (High Efficiency Mode) For Superior Efficiency And Power Savings
  • INPUT: 120 Volt, 20 Amp NEMA 5-20P (Plug)
  • OUTPUT: 6x 120 Volt, NEMA 5-15/20R Battery & Surge Protected Receptacles (Standard Wall Receptacles) 
  • Full Load (1,800 Watts) Estimated Run Time On Battery Power:
    • Up To 11 Minutes On Internal Batteries
      • 4 Batteries, 12 Volts, 9 Amp Hours Each
    • Up To 35 Minutes On Internal Batteries + 1 Battery Pack
      • 12 Batteries, 12 Volts, 9 Amp Hours Each
    • Up To 58 Minutes On Internal Batteries + 2 Battery Packs
      • 20 Batteries, 12 Volts, 9 Amp Hours Each
  • Half Load (900 Watts) Estimated Run Time On Battery Power:
    • Up To 23 Minutes On Internal Batteries
      • 4 Batteries, 12 Volts, 9 Amp Hours Each
    • Up To 1 Hours 09 Minutes On Internal Batteries + 1 Battery Pack
      • 12 Batteries, 12 Volts, 9 Amp Hours Each
    • Up To 1 Hours 56 Minutes On Internal Batteries + 2 Battery Packs
      • 20 Batteries, 12 Volts, 9 Amp Hours Each
  • Weight: 46 lbs.
  • Dimensions (Inches): 17.3 X 3.5 X 17.5 (W x H x D) 2U
  • Operating Temperature: 32°-104° F
  • Operating Humidity: 20%~95%, Non-Condensing
  • Operating Elevation: 3,280 Feet Without De-Rating 
  • Cold Start Capable (Shipped With Cold Start Disabled, Will Enable Automatically After Receiving Power For The First Time After Shipping)
  • cTUVus, cULus, and FCC Certified
  • Includes Software For Windows Monitoring & Configuration 
  • Free Shipping/Freight Within The United States Or To U.S. Based Freight Forwarder Specified Location (List U.S. Based Location Specified By Forwarder In Shipping Address For International Orders)

User Guides:

-Battery Backup Power Convertible Rack Mount UPS User Guide.pdf
-Battery Backup Power Convertible Rack Mount External Battery Pack User Guide.pdf

Spec Sheet/Cut Sheet:
-BBP Convertible DSP Series Specification Sheet.pdf

Replacement Batteries:
-Leoch DJW12-9.0 (Lead Acid), Yuasa 7.5-12 (Lead Acid), Yuasa REW45-12 (Lead Acid), Or Battery Backup Power BBP-LIFEPO4-HDR-12V-7.2AH (Lithium Iron Phosphate)